EZ-Peak NiCad NiMH Charger with Traxxas Connector
|
Buy EZ-Peak NiCad NiMH Charger with Traxxas Connector here. To find out more information or to view another
item in this category, click next Peak Chargers. To go back to where you were
looking, use the "you are here" links below. Thank you for shopping at
totallyrc.com!
You Are Here: Home > RC Accessories > Peak Chargers > Item 23 of 49
|
Features
Easy plug-and-charge operation No setup or programming required Charges 6 to 8-cell NiCad and NiMH sub-C battery packs 4-amp output Micro Peak technology automatically stops charging when pack reaches full capacity Status LED indicates when the EZ-Peak is ready to charge, charging, and has completed charging the battery Includes Traxxas High-Current Connector Alligator-clip DC leads and detachable AC cord for convenient charging in the shop or in the field Compact design 5x3.5x2 in. is easy to
The EZ-Peak is equally at home on the bench with AC power, or in the field with a DC power source. A Traxxas High- Current Connector is installed for use with Traxxas Power Cell battery packs and other NiCd and NiMH packs with Traxxas connectors (an adapter (#3062) is sold separately for use with Molex/Tamiya-style connectors.
Reader Reviews
no more waiting 8 hours for your trickle charger to run, this EZ-Peak really does make it easy.
I'm using it with the stock 7-cell 3000mah NiMH Traxxas now provides on their Slash. Some sites caution against charging your batteries at higher Amps, so I was a little worried about using a 4A charger on the 3A battery. However, the charger switched to trickle-mode to avoid overcharging, so it makes charging a no-brainer. Also, because you're pumping 4A into a 3000mah, you're at full charge at around the 45 minute mark. The battery was just slightly warm to touch when the green light came on to indicate it's ready.
So far so good and I'm glad I got this.
two notes:
1) Don't charge your LiPo batteries with this, as the EZ-Peak does not have the electronics to measure safe charging of the more finicky LiPo
2) I've read other forum posts that says this is not for batteries for your 1:16 scale or smaller cars. Those tend to be in the 1500mah to 2000mah range and pumping 4A into them will wear out your battery quickly (or even cause them to fail catastrophically) For those, look for the 2A charger.
Update 6/1/2011:
I originally gave this product a solid 5 stars. However, I must now come back and revise my review down to a 0, if they had a 0. since they don't, it's a 1-star.
After using the product off and on for 2 months (used to charge my battery 5 times at most) the unit refused to turn on. The light that's supposed to blink red is now dark.
I contacted customer service and they said, since it's past 30 days, I have to pay $15 + $5 shipping + whatever shipping to ship the unit back to them in Texas, to get it looked at. That's $20+ to get them to look at a $40 item that was used for less than 2 months.
To say I'm very very disappointed would be an understatement.
If this is how they treat their customers, then I'd say steer clear of Traxxis. While the car and charger were great when it ran, if it breaks down for any reason, you're left high-and-dry.
The reason for a 1-star? If the product doesn't work after 2 months, it's no better than a lump of coal. A product that doesn't work really doesn't deserve anything more, especially when their so-called 'lifetime' warranty is only good before the item is 'dead'.
|
|
EZ-Peak NiCad NiMH Charger with Traxxas Connector
List Price: $47.99
Available from Amazon Price: $32.48 Updated on 5-23-2012.

|
click here to return to the top
We offer EZ-Peak NiCad NiMH Charger with Traxxas Connector and other
related Peak Chargers here at Totally RC. To view
more Peak Chargers please use the previous and next links
above.
|
7723 Products Online and Available as of 5-23-2012
NOTICE: All prices, availability, and specifications
are subject to verification by their respective retailers.
Copyright © 2012 Totally RC
|