Duratrax IntelliSpeed 16T Mild-Modified Reverse ESC

This is the Team DuraTrax I-Speed Mild Modified / Forward and Reverse Electronic Speed Control with a Futaba J connector. / FOR MILD MODIFIED MOTORS DOWN TO 16 TURNS ONLY! / ABS Braking for better control in and out of corners, and adjustable / reverse-delay, reverse-lockout, and traction control. / / *** 120 Day Limited Warranty *** / / FEATURES: Forward and Reverse and ABS Braking / MOSFET Equipped / Thermal Protected / More Efficient Than Mechanical Speed Controls / Reverse Lockout / LED ( Forward and Red Full Speed,Red and Green Reverse) / Pre-Installed Futaba J Connector / Pre-Installed Bullet Type Connectors For Motor / Standard (Tamiya Type) Connector For Battery Pack / ON/OFF Switch / BEC Equipped. / / INCLUDES: One I-Speed Forward/Reverse Electronic Speed Control with Futaba J / Connector and Bullet Motor Connectors. / Three .1 Type Capacitors / One Instruction Sheet / / SPECS: ON-Resistance: 0.0046 / Traction Control: 0.0, 0.1, or 0.2 / Reverse Delay: 0.3, or 0.8 / Maximun Continuous Current: 192A / Maximum Peak Current: 660A / Number of Cells: 6-7 / Size with Heatsinks: 1.48""L x 1.34""W x 0.57""H / Weight with Heatsink: 2.19 ounces / Connector: Motor: bullet / Battery: standard (Tamiya) / Motor: 16 Turn Mild Modified / Wires: 14 gauge / / REQUIRES: Installing .1 Type Capacitors Onto Motor with Solder / Installing into Electric Vehicle / 6 or 7 Cell Battery / Motor (16 Turn or Above) / kh2-21-02 / Updated JPG 4/10/02 / ir/kh