Tenergy Universal Smart Charger for NiMH NiCd Battery Packs (6V - 12V) Perfect for RC or...

Features and Benefits * Universal for any NiMH /NiCd battery packs 6V - 12V (5-10 Cells Pack) * Fast charger with current switch to select either 1A or 2A * Charging Current 1A for battery packs with capacity from 1000mAh -1800mAh * Charging Current 2A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is apprx. 1.5 hours * Automatically charging ending with negative delta V * Worldwide usage with 120-240V AC Accessories Included * 1 standard Tamiya connector with Temperature Sensor. * 1 adapter from standard Tamiya to Mini Tamiya. * 1 adapter from standard Tamiya to a pair of alligator clip. Operation Instruction * Connect battery pack to output connector and plug AC power source * Make sure battery polarity is connected correctly (Red wire is positive) * Charger will detect battery voltage automatically, Red LED will be on during charging * When battery is fully charged, current will reduce to trickle charging at 50mA, Green LED will be on * Don't charge battery packs with voltage less than 6V or greater than 12V and capacity smaller than 1000mAh or larger than 5000mAh * Battery pack must be made by high drain current cell * Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misuse. Caution * The charger is designed for indoor use only. Don't leave the charger unattended during charging. * The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods. * Don't cover the charger when charging, ambient temperature shall not be more than 40oC * Don't touch the plug. * Don't leave the batteries and chargers on wood surface or carpet. * Cut off the power supply before connect or disconnect the charger with batteries. * Don't try to disassemble the charger; High voltage inside!