A-10 Slope Glider

This is a A-10 Thunder Bolt,"Warthog" Slope Glider / from GWS / This kit was designed for intermediate to advanced modelers/fliers. / Recommended for modelers who have had trainer airplane experience and / also safely flown/landed low wing planes. / / FEATURES: Construction: Easy interlocking White foam / Wings: One-piece foam wing / Radio compartment: Molded into fuselage / Cowling: Foam motor shrouds / Canopy: Plastic / Cockpit features: Instrument panel decals included / Aileron Control: Single servo required / Hardware: All necessary hardware included / Warranty: Grand Wing Servo Company guarantees this kit free from / defects in both materials and workmanship at date of purchase. / / INCLUDES: All foam fuselage halves,wing,and tail,three .9mm diameter push rods, / one plastic tube,two 3x240mm bamboo sticks,two aileron linkage / wires,one elevator linkage wire,GWS glue,all necassary hardware, / plastic cowl,decals and photo-illustrated instructions. / / REQUIRES: Battery: For receiver / Charger: Timed or Peak / Radio: 3-4 Channel / Servos: 2 pico or naro size (micro or mini) / (1-aileron, 1-elevator) / Servo Extension 6": One (for ailerons) / Building and field equipment / Paint: Optional / / SPECS: Wingspan: 38.1" (968mm) / Wing Area: 216 sq in (13.95sq dm) / Weight: 12.7-14.6oz (360-410g) / Wing Loading: 8.46-9.64oz/sq ft (25.8-29g/sq dm) / Length: 34.3" (872mm) / Center of Gravity: 2"-2.2" (50-57mm) Back from the wing's leading / edge at the fuselage sides. / Control Throws- Low Rate High Rate / Ailerons: Up & Down 8mm 11mm / Elevator: Up & Down 11mm 13mm